Languages
Catalan
Spanish
French
English
  Home | Products | Location |  Contact

Shear 3X6

Faci clic per veure l' imatge

Shear Machine has a length of cut of 3,040 mm. Its capacity of cut is in steel of 42 kg/m2 of 6 mm, in stainless steel of 70 kg/m2 of 3 mm and in aluminum it is of 8 mm. Its angle of cut is of 2 degrees. The engine power is of 12 CV. It has 13 blankholders with a diameter of 50 mm. The passage between blankholders and pulls is of 15 mm the distance edge of cut to blankholder’s center is of 28 mm. The pressure of the hydraulic pump is of between 150 and 250 bar. The section of the blade is of 40x15. The capacity of the hydraulic oil tank is of 130 liters. The number of cuts per minute is of between 11 and 15. El name of cuts to per minut is between 10 and 15.

Technical Features

in Shear 3x6

STEEL 42 Kgs/m2

Up to 6mm.

STAINLESS STEEL 70 Kgs/m2

Up to 4mm.

ALUMINIUM

Up to 8mm.

Motorised stop with automatic positioning

digital

Cutting length

Up to 3050 mm.

Màximal  opening of the top

700 mm.

 Positioning of the angle (twigible with digital positioner)

automatic/manual

Shadow line lighting    Number of strokes per minute

10/15 per minute

Four-edge blades.

4 Four-edge blades.

Electric foot switch

with two positions.

Teflon blankholders. (15) 

Teflon

Punch carrier with adjustable bending of the blade.

Speed, route i cadence

Trampilla abatible 

1000 mm.

Steel scale

--------------------

Motor power

12Kw-380v/220

Table of Balls

--OPTIONAL --

Tel.(+34) 661 35 64 36                    Tel.(+34) 617 43 51 73                    Tel.(+34) 972 75 20 81

Fax.(+34) 972 75 07 80  


Girona - Spain

www.indmontgri.com
info@indmontgri.com
Industrial Montgri SL.Copyright© 2006.